Advertisement
NB: It is important that the rebar be properly fitted in the hook and
against the rollers.
INTERIOR ANGLE
Since the piston stroke is limited , interior straightening/bending angle
will vary according to rebar diameter and operating mode. Refer to
the table below.
MAINTENANCE
CLEANING
Cleaning bender every day,preferably immediately after use.
!CAUTION: Wear gloves to protect hands from metal splinters.Do
not use an air-gun:blasting with air can cause metal filings and/or
dust to get into eyes and respiratory system.
Disconnect unit.
1.
Wipe or brush away all dirt and metal filings.Pay particular attention
2.
to the lower half of the piston, where dirt is more easily accumulated.
OIL-LEVEL CHECK
As the bender is hydraulically operated,the oil-level must be
checked at frequent intervals,preferably every day.Failure to
maintain the oil at the proper level results in a drop in pressure and
loss of bending power
10
Advertisement
