Broan B150H75NS User's And Installer's Manual page 5

2.1 L M
OCATING AND OUNTING THE
Suspended to the joists or trusts:
• Slightly bend the brackets on the unit to insert the provided
chains.
• Hang the unit to the joists (or trusts) using the chains. Springs are
not required.
• Always make sure that the unit is no more than 1/4" off level.
OR
Wall mounted:
• Choose the appropriate location(s) for the mounting brackets
(see illustration below) according to stud(s) position.
• Insert the provided brackets under the unit frame (see illustration
hereafter).
• Fix the bracket using the screw no. 8 x 3/8".
• Using the 4 no. 8 x 1½" screws provided, secure the unit to the
wall making sure that the 4 screws engage into a stud.
• Always make sure that the unit is no more than 1/4" off level.
INSTALLATION WITH 2 BRACKETS
VD0486
U ( .)
NIT CONT
VD0485
VD0488
INSTALLATION WITH 4 BRACKETS
VD0487
5