Table of Contents
Advertisement
Steering Wheel Control Compa�bility
SWC Introduc�on
Steering Wheel Control (SWC) func�on allows
you to operate this unit via an external device
(steering wheel control).
A third-party adapter must be used in order
for this unit to be compa�ble with your OEM
steering wheel controls. We recommend PAC
SWC series.
This unit has a built-in 3.5mm SWC interface
that is compa�ble with many popular 3rd party
SWC control modules, such as PAC, METRA,
and others.
3.5mm SWC input (black socket) is located on
the supplied wire harness which is connected
to the rear of the unit.
YELLOW
YELLOW
BLACK
Wire Harness
SWC Input
Illustra�on for reference only
Programmable Controls
The following radio / audio func�on controls
are available to be programmed.
Source
Mute
Home
Seek + / Next Track
Seek - / Previous Track
Volume +
Volume -
Band
Phone Menu
Bluetooth Talk
Bluetooth End Call
Voice Assistant / PTT
Note
Not all OEM steering wheel func�ons may be
supported.
Specifica�ons are subject to change without
no�ce.
A
POWER
MAXIMUM OUTPUT 500m
SWC Installa�on / Programming
Contact your local installa�on expert for the
correct SWC adapter for your specific vehicle.
1. For most SWC adapters, select program
using "Pioneer/Sony/Other" mapping order
as described in "Programmable Control".
2. When programming, if a func�on is not
supported (or not desired), then the func�on
MUST be skipped as per the SWC module
instruc�ons.
3. The SWC func�on MUST be programmed in
the correct order as per the func�on mapping
order instruc�ons.
Note
For SWC programming technical assistance, call
the number in your SWC instruc�on manual.
36
Advertisement
Table of Contents
