Speaker - Boss Audio Systems ELITE BECPA10W User Manual

S akers
UTION
Do not chassis ground any speaker wire leads.
UTION
Only use 4-8 Speakers
Do not use 1-3 Speakers
UTION
Do not bridge any of the channels, they are
only to be wired in stereo mode.
Note
Unused speaker wires need be insulated with
tape, heat shrink, or crimp connectors.
Never use wire nuts.
If the speaker outputs are not used, turn O
the internal amp to reduce the possibility of
noise entering the signal chain.
Note
Observe speaker polarity when making
Rear Right (Ch. 4)
Purple (+)
Purple/Black (-)
Front Right (Ch. 2)
Gray (+) White (+)
Gray/Black (-)
White/Black (-)
31
Green (+)
Green/Black (-)