Audio Pre-Amp/Av In/ Radio/Gps - Boss Audio Systems ELITE BECPA10W User Manual

Audio Pre-amp/AV IN/ Radio/GPS

Note
Subwoofer Pre-amp is a non-fading mono
output.
Note
Always run signal wires away from power
cables to reduce the possibility of noise.
Note
This product has GPS positioning function
which is only used as an auxiliary function
of Android Auto / CarPlay navigation.
If the following icon is displayed on the top
of the screen, this indicates no or improper
GPS antenna installa�on. Check whether the
supplied GPS antenna is correctly and
securely installed on the rear of the product.
FL FR L-IN
RL RR R-IN
SUB1 SUB2 V-IN
RADIO
Audio/video Inputs
FM/AM Antenna Jack
Pre-Amp Audio Outputs
(Front/rear speaker outputs
and two subwoofer outputs)
32
Note
If pre-amp outputs are being used exclusively,
turn O the internal amp of the product, to
reduce the possibility of noise entering the
signal chain.