A
Control
B
Destination
Address
C
Destination Port
D
Frame Rate
Memo :
● When the power of VN-C215VP4U shuts
down accidentally during multicast
transmission, transmission will restart
automatically when VN-C215VP4U is started
up again.
For starting or stopping streaming.
Parameters that are set on the Streaming page will be saved when
transmission is started upon pressing the [Start] button.
For specifying the destination address.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that they are all set to different multicast
addresses.
For specifying the destination port number.
Set to an even number for RTP compliance. Odd numbers cannot be used.
When other devices that make use of multicast transmission exist, it is
recommended that they are all set to different port numbers.
Multiple multicast streams cannot be received on 1 computer when there are
duplicate port numbers.
Specify the frame rate when performing multicast transmission.
The actual frame rate used for transmission will be the frame rate on the
Encoding page when a value that is larger than the frame rate in the
Encoding page is specified. (A Pg. 46)
59