LX-D700U/E.Q33E 6/3/98 3:48 PM Page 19
Adjustment on the height and tilt of the screen
The elevation angle and tilt angle are adjusted with the feet. Objective for this action is to
adjust the height and tilt of the projection screen. Trapezoidal distortion cannot be cor-
rected. We recommend you to enjoy the picture by making as much perpendicular pro-
jection as possible against the screen.
When the feet to adjust lift and tilt angles approach the limits of adjustment, it becomes hard to turn them.
Do not turn the feet forcibly. Mechanical failures must be avoided.
To adjust the height, turn the foot having an elevation angle adjusting function. It can be elevated up to +7°.
Turning direction
To adjust the tilt of the picture, turn the foot with a tilt angle adjusting function.
Installation
CAUTION
Elevation
7°
angle + 7°
Turning direction
19