Specification; Troubleshooting - BUTURE VC10 User Manual

7.SPECIFICATION

Model
Rated voltage
Battery type
Suction mode
Charge time

8.TROUBLESHOOTING

ISSUE
(1)Out of power
(2)Battery pack not installed in place
The vacuum (3)The motorized brush head is
cleaner not work blocked with hair and other debris
(4)Auto protection for overheating
Switch Button not work
(1)Dust cup is full of garbage
(2)Dust baffle misaligned
(3)HEPA Filter are clogged or not
installed in place
Weak suction
(4)HEPA Filter not dry
(5)The motorized brush head is
blocked with hair or other debrisLow
power
(1)Battery pack is dead or broken
Charging indicator
(2)Charger is not correctly connected
not light up or flash
Incompatible adaptor
abnormally
(1)Insufficient charging time
Insufficient running (2)Battery aging
time after charging (3)The motorized brush head or is
tangled by hair or other debris
Incompatible adaptor
(1)Brush roller are blocked with hair,
pebbles or other debris
Motorized brush
(2)Dust cup is full of dust
head not rotate
(3)The brush may be defective
If you have any questions, email to tech-support@ibuture.com
CAUSE
EN
16
VC10
DC22.2V
Lithium
Min-Mid-Max
4-5H
SOLUTION
(1)Charge the vacuum cleaner
(2)Battery pack installed in place
(3)Clean the motorized brush head
(4)Restart after cooling down Contact
BuTure Support for replacement
(1)Empty the dust cup
(2)Align the dust baffle to correct hole
(3)Clean or change the HEPA Filter
(4)Dry out HEPA Filter
(5)Clean the motorized brush head
Charge the vacuum cleaner
(1)Change the battery pack
(2)Make sure the charger are fully
plugged in socket
(3)Use the adaptor provided by
BUTURE
(1)Vacuum cleaner fully charged
(2)Change the battery
(3)Clean the motorized brush head
Use the charger provided by BUTURE
(1)Clean the brush roller
(2)Empty the dust cup
(3)Connect the brush head with the
main body to see if it would spin or not,
then contact us.