Advertisement
To connect to an amplifier/receiver equipped with 5.1-channel inputs
The unit supports the linear PCM multichannel format of DVD AUDIO and can feed multichannel audio output signals
from the 6 ANALOG AUDIO OUT jacks.
It is also equipped with the DTS and Dolby digital decoders. So you can enjoy any type of the high quality surround
sounds by connecting the unit to an amplifier/receiver equipped with the 5.1-channel inputs.
Connect the unit
s ANALOG AUDIO OUT jacks to the analog 5.1-channel inputs of an amplifier or receiver using the
'
supplied audio cables.
The unit
SUBWOOFER
CENTER
RIGHT
PCM / STREAM
RIGHT
OPTICAL
COAXIAL
DIGITAL OUT
AUDIO OUT
• Be sure to connect correctly between corresponding terminals. The order of the 5.1-channel terminals depend on units.
NOTE
• When using the 5.1-channel outputs of the unit, set the "DOWN MIX" in the "PREFERENCE 2" on-screen display to "OFF" and
select "5.1 CHANNEL" or "EXPERT" in the "SPK.SETTING" on-screen display. If the "EXPERT" is selected, you can control the
audio output balance of the speakers (see pages 57 and 59).
LEFT
REAR
VIDEO
COMPONENT
LEFT
Y
P
P
B
R
FRONT
S-VIDEO
VIDEO OUT
Audio/Video
cable
(supplied)
Audio cable
(supplied)
Audio cable
(supplied)
AV COMPU LINK
Amplifier or receiver
FRONT
White
Yellow
Red
REAR
White
Red
CENTER
White
SUBWOOFER
Red
Getting started
AUDIO IN
LEFT
RIGHT
LEFT
RIGHT
English
19
Advertisement
