About The Demonstration Mode (Demo Mode); How To Reset Your Unit - JVC KW-XC88AU Instructions Manual

IMPOR TANT FOR LASER PRODUCTS
Precautions:
1.CLASS 1 LASER PRODUCT
2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct
exposure to beam.
3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all
servicing to qualified service personnel.
4.CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches
to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.
5.CAUTION: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.

About the demonstration mode (DEMO MODE)...

When shipped from the factory, "DEMO" is set to "DEMO ON" in this unit. The demonstration will
start automatically if no sound comes in for 3 minutes. (See page 25.)
To deactivate the demonstration mode
1
Press and hold SEL for more than 2 seconds so that one of the PSM items appears on the display.
2
Press
or
3
Press - to select " DEMO OFF ".
4 Press SEL (Select) to finish the setting.
CAUTION on Volume Setting
CDs produce very little noise compared with other sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged by the sudden increase in the output level.
Therefore, lower the volume before playing a CD and adjust it as required during playback.

How to reset your unit

Press the reset button on the front panel using
a ball-point pen or similar tool.
Note:
Your preset adjustments
sound adjustments
2
to select " DEMO . "
such as preset channels or
will be erased.
KW-XC88
DISP
AUX
EQ
SEL
LV
C D C H A N G E R C O N T R O L
MODE
2
1
7
CD/CASSETT
DOLBY & NR
6
5 12
11
4 10
3 9
8
TA
EX