Table of Contents
Advertisement
1
3
1
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
2
or
PROG
TAPE
3
4
Adjust the sound as you want (see pages 18 – 20).
• If you need to change the spectrum analyser pattern, see page 21.
To drop the volume in a moment
Press
briefly while listening to any source. "ATT" starts flashing on the display, and
/ ATT
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
for more than 1 second.
/ ATT
BASIC OPERATIONS
Turn on the power.
Select the source.
To operate the tuner, see pages 6 – 10.
AUX
To operate the CD player, see pages 11 – 13.
To operate the tape deck, see pages 14 – 17.
To operate the CD changer, see pages 27 – 29.
To operate an external device, see page 30.
To turn up the
Adjust the volume.
volume
To turn down
the volume
2
2
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 23.
Volume level appears.
5
Advertisement
Table of Contents
