Other Main Functions; Changing General Settings (Psm); Setting The Clock - JVC KW-XC550J Instructions Manual

OTHER MAIN FUNCTIONS

Changing general settings (PSM)

You can change the following settings for this unit by using the PSM (Preferred Setting Mode)
control.
• CLOCK (H/M): Adjusts the built-in clock (see below).
• AUX: Selects the name which will be displayed when you press AUX (see page 24).
• BEEP: Turn on or off the key-touch tone function (see page 24).
• DIMMER: Selects the dimmer mode (see page 25).
• AREA: Selects the area you use this unit — when using this unit in an area other than North
or South America (see page 25).
¢
4
+/–
SEL

Setting the clock

After installation, set the built-in clock correctly.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If "PSM CLOCK H" does not appear, press ¢
3 Press + or – to adjust the hour.
4 Press ¢ or 4
5 Press + or – to adjust the minute.
6 Press DISP to start clock.
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation:
Frequency Clock
• If the unit is not in use when you press DISP, the power turns on, the clock time is shown for
5 seconds, then the power turns off.
until "PSM CLOCK M" appears on the display.
During tape operation:
Play mode
or 4
repeatedly until it appears.
\
The current setting appears.
During CD operation:
Elapsed
Clock
playing time
DISP
Clock
23