Titan TTHTP26 Manual page 27

TTHTP26
> Move the cutting device (1) lightly through the cutting surface in a sweeping
motion following the shape of the hedge or shrub. A slight 15° tilt downwards of
the cutting device in the direction of motion is recommended for optimum cutting
performance.
> Do not rush and do not attempt to cut too much with one stroke of the cutting device.
18
20
Body on the opposite Body on the opposite
side of the blades side of the blades
22
Body on the opposite Body on the opposite
side of the blades side of the blades
> For vertical cuts, start the first cut from the bottom cutting upwards to the top. This will
prevent any of the trimmings falling into the path of the area still to be cut (Fig. 24).
5059340124346-TTHTP26-GB-V01.indd 27 5059340124346-TTHTP26-GB-V01.indd 27
Exhaust outlet (21)
away from the body
19
21
23
Operation
27
18/9/2020 9:55 AM 18/9/2020 9:55 AM