Advertisement
Available languages
Available languages
Liquid Tight Connector
3. Install the Liquid-Tight Conduit
NOTICE: If local codes will not permit you to use a liquid-tight,
flexible conduit, do not attempt to install this toilet.
CAUTION: Risk of product or property damage. Do not use
rigid conduit to install this toilet. Rigid conduit may put
excessive stress on the toilet, which can cause damage to the
toilet tank or the installation site.
Cut a 36" (91.4cm) length of liquid-tight conduit. Use an
appropriate liquid-tight connector to connect the conduit to the
underside of the junction box located on the inside rear wall of
the toilet tank.
1021800-2-B
Junction Box
Liquid Tight Conduit
(36" (91.4cm))
6
Kohler Co.
Advertisement
