JVC KD-HDR20 Instructions Manual page 9

Searching for HD Radio stations
only
[Hold]
When a station is tuned in, searching stops.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 24.
1
Call up the menu.
[Hold]
2
Select "TUNER."
[Turn] = [Press]
3
Select "MONO."
[Turn] = [Press]
4
Select "MONO ON."
[Turn] = [Press]
Reception improves, but stereo effect will be lost.
• The MO indicator lights up on the display.
To restore the stereo effect, repeat the same
procedure to select "MONO OFF." The MO indicator
goes off.
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
While listening to an HD Radio station...
• See also page 24.
[Hold]
The menu is called up.
[Turn] = [Press]
• Repeat this procedure.
Select "TUNER" = "BLEND HOLD"
= "AUTO/DIGITAL/ANALOG"
Lights up when holding the digital reception.
Flashes when holding the analog reception.
• If no sound can be heard with "AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "AUTO" in the
following cases:
– When you tune in to another broadcast.
– When you change to another source.
– When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
OPERATIONS 9