Installation (In-Dash Mounting) - JVC KD-G501EE Instructions Manual

KD-G507
Installation/Connection Manual
GET0194-002A
[EE]
ENGLISH
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your
vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC
IN-CAR ENTERTAINMENT dealers.
Parts list for installation and connection
The following parts are provided for this unit.
After checking them, please set them correctly.
A / B
Hard case/Control panel
E
Power cord
H
Mounting bolt—M5 x 20 mm

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a
company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
1
B
3
J
*1
C
Sleeve
F
Washer (ø5)
I
Rubber cushion
2
D
* 1 When you stand the unit, be
careful not to damage the fuse
on the rear.
* 1
C
•
4
!
Do the required electrical connections.
@
¤
D
B
1
D
Trim plate
G
Lock nut (M5)
J
Handles
1 8
I
4
m
m
5 3
C
~ m
m
Ÿ
H
⁄
Bend the appropriate tabs to hold the
sleeve firmly in place.
1203KKSMDTJEIN
EN, RU