JVC KD-G501EE Instructions Manual page 96

B Connections Adding Other Equipment /
Amplifier /
You can connect an amplifier and other equipment to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so
that it can be controlled through this unit.
• For amplifier only:
Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker
leads of this unit unused.
Signal cord (not supplied with this unit)
* 3 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not
coated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do
so may cause damage to the unit.
CD changer /
Refer also to page 26 of the INSTRUCTIONS.
External Component /
KD-G507
CD changer jack
Rear speakers
INPUT
L
L
JVC Amplifier
R
R
LINE OUT
L
L L
KD-G507
R
R R
REAR FRONT
INPUT
L
R
You can connect another power amplifier for front speakers.
Connecting cord supplied for your CD changer
CAUTION / :
• Before connecting the CD changer, make sure that the unit is turned off.
•
* 4
KS-U57
L
R
Signal cord (not supplied for this unit)
•
•
Remote lead
Remote lead (Blue with white stripe)
3
*
Front speakers
L
Front speakers
JVC Amplifier
R
* 3
* 3
JVC CD changer
KD-G507
L L L
R
R R
4
Y-connector (not supplied with this unit)
To the remote lead of other equipment or power aerial if any
External component
* 4 Line Input Adapter KS-U57 (not supplied with this unit)
4
*