Whirlpool R-92 Manual page 46

2. Trace the circuit for the cubed ice operation by closing the necessary switches. Refer to the
Wiring Diagram NOTES at the bottom of the page.
L1
NOTES:
1. Freezer door is open, ice dispenser selection in Cubed mode, and dispenser lock switch in Locked position.
2. The dispenser has a built-in inverter board which converts the 115 VAC to 115 VDC. The OR/BU wire is the
positive (+) side of the DC signal, and the PK/BK wire is the negative (–) side. The BR/WH and RD/WH wires
switch polarity, depending on the crushed/cubed switch position, (see the following table).
To Light Switch
BR/WH
Crushed –
Cubed +
7-2
RD/WH
+
–
N
ICE DISPENSER
MOTOR (SEE NOTE 2)