Zotac ZBOX PRO ZP-CI333 NANO User Manual page 22

5. Connecting to USB 3.1 devices
Connect USB 3.1 devices such as external hard disk drives, SSDs and flash drives to the USB
3.1 port on the system rear panel.
6. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
7. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
8. Connecting the power adapter and turning on the ZP-CI333 NANO
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
 When your ZP-CI333 NANO is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
21