JVC GY-DV5100U User Manual page 82

11. MENU SCREENS
11-10 LCD/VF Menu Screen (Cont'd)
■ LCD/VF (2/2) Menu Screen
Item
BATTERY Selects whether the remaining battery level should be shown in minutes
INFO [min], percentage [%] or voltage [V] in the LCD monitor or viewfinder.
VOLTAGE : Indicates battery voltage in 0.1 V steps.
TIME
CAPA%
changes as shown below according to the remaining battery level.
: 50% or more
MEMO
● When remaining battery level is set to TIME or CAPA%, "
is shown when battery level becomes less than 10%.
● Remaining battery levels in [min] and [%] can be selected when
an Anton-Bauer Battery Holder (QR JVC DIGI) is attached.
Remaining battery level is shown automatically in [V] when using
other battery holders.
● When remaining battery level is set to TIME or CAPA% and
information from the battery is not correct (calibration required),
the display switches between voltage [V] and "
seconds.
TAPE Selects whether or not the remaining tape time (minutes) is shown in the
REMAIN status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
TC/UB Selects whether or not the time code or user's bits data should be shown
in the status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
* Whether the time code or user's bits data is shown is selected with the
COUNTER switch.
AUDIO Selects whether the audio level meters should be shown in the status
display on the LCD screen and the viewfinder screen.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
LCD COLOR Adjusts the color saturation of the LCD monitor.
LCD Adjusts the contour of the LCD monitor.
PEAKING
PAGE BACK
To return to the LCD/VF (1/2) menu screen, align the cursor with this
position and then press the SHUTTER dial.
82
Function
: Remaining battery is shown in minutes [min].
: Remaining battery is shown in percentage [%].
: 10% to less than 50%
:
Variation Range Initial Setting
VOLTAGE
TIME
CAPA%
: 10% or less
RES"
CAL" every 2
OFF
ON
OFF
ON
OFF
ON
MAX (5)
4
to
NORMAL
to
–4
MIN (–5)
MAX (5)
4
to
NORMAL
to
–4
MIN (–5)
VOLTAGE
ON
OFF
OFF
NORMAL
NORMAL
––––– –––––