JVC GY-DV5100U User Manual page 37

5.
6.
Mount screws B
6.
Mount screws B
7.
8.
Black screws A
Using a Flat Shape Type Battery Pack (optional)
Lock release
lever
Connector
Wire layout
4. POWER SUPPLY
5.
Connect the connector and battery holder connector coming
out of the camera.
CAUTION:
Following connection of the connectors, insert them into
the connector compartment.
Take care not to pinch the wires. This could result in
damage.
6.
Attach the battery case with the four mount screws B.
CAUTION:
Mount screws B use M3 × 6 mm screws.
7.
Attach the battery case cover.
8.
Attach the two battery case black screws A.
Attaching a Flat Shape Type Battery Pack
1.
Open the battery case cover while pushing the lock release
lever.
2.
Insert the battery pack into the battery case with its
electrodes facing the unit.
3.
Close the battery case cover.
Be sure to set the POWER switch to OFF before replacing
the battery pack.
37