JVC GY-DV5100U User Manual page 80

11. MENU SCREENS
11-9 AUDIO/VIDEO Menu Screen (Cont'd)
Item
AUDIO REF. Sets the reference audio level of the tape (both CH-1 and CH-2).
LEVEL –20dB : Records with –20 dB as the reference audio level.
–12dB : Records with –12 dB as the reference audio level. Use this setting
* Use the same setting for playback as for recording.
* This setting is unrelated to the audio level of the IEEE 1394 signal.
AUDIO Used to select which channels to reproduce when playing back a tape
SELECT with sound recorded on 4 channels. (Can only be set in the VTR mode.)
CH1/2 : To reproduce the sound recorded on CH-1 and CH-2.
MIX : To simultaneously reproduce the sound of all four channels.
CH3/4 : To reproduce the sound of the CH-3 and CH-4 channels.
MEMO:
The GY-DV5100 does not allow after-recording on the CH-3 and
CH-4 channels.
AUDIO Selects whether stereo sound or mixed sound is output from the PHONES
MONITOR jack when the MONITOR SELECT switch is set to MIX.
STEREO : Stereo sound
* Only audio of CH-1 is output from the monitoring loudspeaker.
MIX
SET UP Selects whether the camera image or VTR playback image should be
provided with the setup signal.
* Setup signal can be selected even for IEEE1394 signal input.
0.0% : Setup signal is not attached to the recording/playback signal.
7.5% : Setup signal is attached to the recording/playback signal.
PAGE BACK The TOP MENU screen returns when the SHUTTER dial is pressed while
the cursor is at this position.
80
Function
when playing back the tape using DV equipment for general
consumer use.
The GY-DV5100 records audio on the CH-1 and CH-2 channels
during shooting.
(CH-1 audio is output from L, CH-2 audio is output from R)
: Mixed sound
(The mixed CH-1 and CH-2 audio is output from L and R)
Variation Range Initial Setting
–20dB –20dB
–12dB
CH1/2 CH1/2
MIX
CH3/4
STEREO MIX
MIX
0.0% 7.5%
7.5%
––––– –––––