Table of Contents
Advertisement
Contents
Connections
o Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
1
Peel off about 3/8 inch (10 mm) of sheathing from the
tip of the speaker cable, then either twist the core wire
tightly or terminate it.
2
Turn the speaker terminal counterclockwise to loosen it.
3
Insert the speaker cable's core wire to the hilt into the
speaker terminal.
4
Turn the speaker terminal clockwise to tighten it.
Front panel
Display
Playback
Settings
o Connecting the subwoofer
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
The same signal is output from the respective subwoofer terminals.
AUDIO
IN
PHONO
SW1
29
Rear panel
Tips
AUDIO
IN
PRE OUT
DIGITAL AUDIO
VIDEO
IN
(ASSIGNABLE)
SUBWOOFER
(ASSIGNABLE)
(ASSIGNABLE)
1 CBL/SAT 2 AUX
1
1 CBL/SAT
CBL/SAT
1 TV
AUDIO
VIDEO
OUT
2
2 AUX
MONITOR
COAXIAL
OPTICAL
ANTENNA
AM
FM
Remote
Index
Appendix
NETWORK
IN
2 MEDIA
PLAYER
SW2
Advertisement
Table of Contents
