Denon AVRS650HOM Owner's Manual page 142

Contents Connections
o INPUT MODE
Set the audio input modes for each input source.
It is normally recommended to set the audio input mode to "AUTO".
AUTO
(Default):
HDMI:
DIGITAL:
ANALOG:
0 When digital signals are properly input, the ~ indicator lights on the display.
If the ~ indicator does not light, check "Input Assign" and the connections.
(v p. 140)
0 If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose input
source is "TV Audio" is fixed to ARC.
0 When an eARC function-compatible television is connected to the HDMI
MONITOR connector, the input mode whose input source is "TV Audio" is
fixed to eARC.
Front panel Display
Playback
Automatically detect input signal and
perform playback.
Play only signals from HDMI input.
Play only signals from digital audio input.
Play only signals from analog audio input.
Rear panel
Settings
o Set Defaults
The "Input Assign" settings are returned to the default settings.
142
Remote
Tips Appendix
Index