Clarion dxz738rmp Owner's Manual page 9

Basic Operations
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
GWhen "B-BOOST" is set
"SW-VOL 0" ➜ "B-BOOST" ➜ "BAL 0" ➜
"FADER 0" ➜ Last function mode.
GWhen "IMPACT" is set
"SW-VOL 0" ➜ "IMPACT" ➜ "BAL 0" ➜
"FADER 0" ➜ Last function mode.
GWhen "EXCITE" is set
"SW-VOL 0" ➜ "EXCITE" ➜ "BAL 0" ➜
"FADER 0" ➜ Last function mode.
GWhen "CUSTOM" is set
"SW-VOL 0" ➜ "BASS" ➜ "TREBLE" ➜
"BAL 0" ➜ "FADER 0" ➜ Last function
mode.
GWhen "Z+ OFF" is set
"SW-VOL 0" ➜ "BAL 0" ➜ "FADER 0" ➜
Last function mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is "B
(Adjustment range: –6 to +8)
3. Press the [d] or [a] button to select
"B FREQ 50 ".
Å Å Å Å Å Î Î Î Î Î
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "B
50 ".(Adjustment 50/80/120 Hz)
Î Î Î Î
Î
4. Press the [d] or [a] button to select "B
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is "B
justment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "TREBLE".
2. Turning the [ROTARY] knob clockwise em-
3. Press the [d] or [a] button to select
4. When the adjustment is complete, press the
Adjusting the balance
1. Press the [A-M] button and select "BAL 0".
2. Turning the [ROTARY] knob clockwise em-
3. When the adjustment is complete, press the
GAIN 0 ".
Å Å Å Å Å Î Î Î Î Î
Adjusting the fader
1. Press the [A-M] button and select "FADER 0".
2. Turning the [ROTARY] knob clockwise em-
FREQ
Å Å Å Å Å
Q 1 ".
Å Å Å Å Î Î Î Î
Å Î
3. When the adjustment is complete, press the
Q 1 ". (Ad-
Å Å Å Å Î Î Î Î
Å Î
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ The factory default setting is "T
(Adjustment range: –6 to +6)
"T FREQ 12k ".
Å Å Å Å Å Î Î Î Î Î
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "T
(Adjustment 8 kHz/12 kHz)
[A-M] button several times until the function
mode is reached.
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is "BAL 0". (Adjust-
ment range: L13 to R13)
[A-M] button several times until the function
mode is reached.
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗ The factory default setting is "FADER 0". (Ad-
justment range: F12 to R12)
[A-M] button several times until the function
mode is reached.
GAIN 0 ".
Å Å Å Å Å Î Î Î Î Î
FREQ 12k ".
Å Å Å Å Å Î Î Î Î Î
13
DXZ738RMP