Use - IKEA FORNEBO Manual

10
2. Connect the 2 red wires together using the
UL listed wire connectors
3. Connect the 2 white wires together using
the UL listed wire connectors
4. Connect the green ( or yellow-green)
ground from the cooktop cable to the green
(or yellow-green) ground wire (in the
junction box) using the UL listed wire
connectors
5. Install junction box cover.
• 3-Wire Cable from Home Power Supply
to 4-Wire Cable from Cooktop - U.S. Only
IMPORTANT: Use the 3-wire cable from
home power supply where local codes
permit connecting the frame-ground
conductor to the neutral (white) junction box
wire.

Use

The induction cooking system is based on
the physical phenomenon of magnetic
induction. The main characteristic of this
system is the direct transfer of energy from
the generator to the pot.
IMPORTANT:
When compared to electric cooktops, your
induction cooktop is:
• Safer: lower temperature on the glass sur-
face.
• Faster: shorter food heating times.
A Cable from home power supply
B Red wires
C White wire and green (or yellow-green) wire
(from cooktop)
D 4-wire cable from cooktop
E Junction box
F White wires
G UL listed wire connector
H Black wires
I UL listed or CSA approved conduit connector
1. Connect the 2 black wires together using
the UL listed wire connectors
2. Connect the 2 red wires together using the
UL listed wire connectors
3. Connect the green ( or yellow-green) and
white cooktop cable to the white (neutral)
wire in the junction box using the UL listed
wire connectors
4. Install junction box cover.
• More accurate: the cooktop immediately
reacts to your commands
• More efficient: 90% of the absorbed en-
ergy is transformed into heat. Moreover,
once the pot is removed from the cooktop,
heat transmission is immediately interrup-
ted, avoiding unnecessary heat losses.
Use only pots bearing the symbol
IMPORTANT:
to avoid permanent damage to the cooktop
surface, do not use:
ENGLISH