Clarion DXZ366MP Owner's Manual page 20

Operations Common to Each Mode
2-1. Select "SCREEN SVR".
3-1. Turn the [ ROTARY ] knob to select the setting.
Each time you turn the [ ROTARY ] knob,
the setting changes in the following order:
SS OFF SS ON
• Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
∗ The factory default setting is "WELCOME TO
CLARION".
2-1. Select "MSG INP <E>".
3-1. Press the [ ] button.
3-2. Press and hold [ BND ] button for 1 second or
longer to clear the old message.
3-3. Press the [
,
to move the cursor.
3-4. Press the [ BND ] button to select a character.
Each time you press the [ BND ] button, the
character changes in the following orders:
Capital letters
Capital letters...
3-5. Turn the [ ROTARY ] knob to select the desired
character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [
or longer to store the message in memory
and cancel input message mode.
∗ Press and hold the [ BND ] button for 1 second
or longer to cancel the input message.
Then press and hold the [
seconds or longer to store the message and
the message return to default setting.
• Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is "ON".
2-1. Select "AUTO SCROL".
3-1. Turn the [ ROTARY ] knob to select "ON" or
"OFF".
20
DXZ366MP
SS MESSAGE.
] lever upward or downward
Numbers Symbols
] button for 2 seconds
] button for 2
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time when the title was changed or the
[ T ] button was pressed for 1 second or longer.
• Dimmer control
You can setting the dimmer control "ON" or
"OFF".
∗ The factory default setting is "ON".
2-1. Select "DIMMER".
3-1. Turn the [ ROTARY ] knob to select "ON" or
"OFF".
To change other settings
1. Press the [ ADJ ] button to switch to the adjust-
ment selection display.
2. Press the [ , ] lever upward or downward
to select the "item name".
Each time the [
down, the item display changes in the following
order:
"BLINK LED" "AMP CANCEL"
"SYS CHK ( E ) "
3. Turn the [ ROTARY ] knob to select the "desired
setting item".
∗ After completing settings, press the [ ADJ ] but-
ton to return to the previous mode.
• Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from the
unit, this indicator blinks.
∗ The factory default setting is "OFF".
2-1. Select "BLINK LED".
3-1. Turn the [ ROTARY ] knob to select "ON" or
"OFF".
• Setting the external amplifier
∗ The factory default setting is "OFF".
2-1. Select "AMP CANCEL".
3-1. Turn the [ ROTARY ] knob to select "ON" or
"OFF".
, ] lever is pressed up/