Table of Contents
Advertisement
Compact 4-Way Cassette Indoor Unit
(2) Temporality hang the panel to body (there is four hangers on each corner of the panel,
hang the hangers to corresponding hooks on the body), as shown in fig 4.4.5.
(3) Detach the air inlet grille from panel, make a wiring connection of signal receiver. Notices
that the connection wire not stuck in the middle of body and panel, or may cause air
leakage and lead to condensation water drop.
(4) Tighten 4 screws at each corner of panel respectively, fix the panel on the body firmly.
(5) After tightening screws, reinstall the air inlet grille.
4.5 Installation of Wired Controller
Wired controller is optional accessory. If wired controller is needed, please contact your local
dealer and install the wired controller according to the instruction manual.
Note:
Do perform the commissioning operation before first use; automatic addressing or other
settings, please refer to the manual of ODU.
5 Wiring Work
Note:
Units must be grounded securely, or it may cause electric shock.
1) Please carefully read the nameplate and the wiring diagram before carry out the wiring work,
Fig 4.4.5
15
Units: mm (in)
(3/16 - 5/16)
Advertisement
Table of Contents
