Inserting The Battery; Functions Of Remote Control Unit Buttons - Clarion compact disc Owner's Manual

6. REMOTE CONTROL

Inserting the Battery

1) Turn the remote control unit upside down,
push the lock in the direction of the arrow,
and pull out the battery holder.
2) Insert the enclosed battery (CR2025) with
the "+" side facing up.
3) Push the battery holder back in securely until
a click is heard.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing the battery, be sure to set the new
battery with the "+" side facing up.
• Do not short-circuit, disassemble or heat batter-
ies.
•
Do not dispose of batteries in flames.
• Dispose of spent batteries in the proper place.

Functions of Remote Control Unit Buttons

Button
FUNC (POWER) Turns power on, switches between tape, radio, and CD, and turns power off when pressed
1
for 1 second or longer.
2 BAND (BAND/ Switches playback direction
DISC/PROG) and cancels scan play.
3
(VOLUME UP)
4
(VOLUME DOWN)
5
(SEARCH DOWN)
6
(SEARCH UP)
7
8 VISU (VISUAL)
9 DISP
ISR
10
11 RPT (REPEAT)
12 EQ (EQ PROG)
13 RDM (RANDOM/ Switches Dolby NR mode on
DOLBY NR) and off.
14 MONI (MONITOR)
SCN
15
(SCAN PS/AS)
Note:
Functions of the source unit and the remote control unit differ slightly.
Tape Mode [ ]
REW, APC-REW
FF, APC-FF
Play/Pause
Switches the display to monitor.
Displays and switches the spectrum analyzer patterns.
Calls ISR. Calls ISR and stores a chan-
nel when pressed for about 2
seconds.
Repeat
Calls the EQ USER display.
Switches the monitor on and off.
Scan Preset scan, stores a station
when pressed for about 2
seconds.
Rear side
1)
Lock
Radio Mode [ ]
Switches reception band.
Turns volume up.
Turns volume down.
Preset channel down
Preset channel up
Switches mute on and off.
None
None
Remote Control Unit
Enclosed battery
(CR2025)
2)
3)
Battery holder
CD Mode [ ]/CD Changer Mode [
Switches the disc (only in CD
changer mode).
Search down
Search up
Play/Pause
Calls ISR.
Repeat
Random
Scan
]
9