Table of Contents
Advertisement
TO CONNECT THE IGP TO THE HOST PC
Click
to turn on the player.
Connect the USB cable to the player and the host PC.
Type "A"
Type "B"
USB port on
USB port on the PC
the player
Windows XP and Windows 2000 will display a
"Device Attached" icon.
Note
Windows may ask to install a driver for the iGP. Please follow the
provided driver installation guide on the previous page.
Once installed, open Windows
Explorer and an additional drive
should be listed called "iGP-100".
10
To PC
Type "A"
USB cable
To iGP
Type "B"
TO USE AS A PORTABLE STORAGE DEVICE
If the player is not connected to the host PC, connect it to the host PC.
(Refer to page 10)
The player will show up as a new
drive in Windows Explorer.
To delete files or folders from the iGP, select the files (folders) to be
deleted and press "Delete" on the keyboard. Click "Yes" when asked to
confirm the delete.
The iGP operates just like an additional hard drive in Windows Explorer.
Files can be copied, deleted, etc.
Note
When the iGP is attached to a computer for an extended
period of time, be sure to plug in the AC adapter. Low batteries can
prevent the proper functioning of the iGP.
Click and Drag files from the PC
to the iGP player.
11
Advertisement
Table of Contents
