Firmware Upgrade - IRiver iGP-100 Instruction Manual

Portable storage device & multi - codec juke box
Table of Contents

Advertisement

GENERAL
BEEP VOLUME
Set beep volume level to 0 / 1 / 2 / 3 step.
RESUME
When ON, player resumes to previous place in
song after STOP or Power OFF.
FADE IN
When activated, volume increases gradually at
playback mode to prevent sudden loudness.
LANGUAGE (Supports 38 languages)
Song title and ID3 tag information is dependent on
the version of the PC operating system that was
used to create it. (For example, if a MP3 files is
created in a Korean version of Windows, the
language setting should be Korean for proper title display)
TUNER REGION
You can set the FM frequency and step according
to your area.
After selecting a new tuner region, all preset stations
will be deleted from memory.
26
LOAD DEFAULT VALUE
Initialize all settings to original factory setting.

FIRMWARE UPGRADE

You can upgrade the player's Firmware.
Refer to page 34 for details.
DISPLAY
BACK LIGHT (Battery)
You can adjust the time that the Backlight
stays on while the player is operated using the
battery built in the player.
(Time range can be made from 1~60 sec.)
BACK LIGHT (Adapter)
You can adjust the time that the Backlight
stays on while the player is operated using AC
adapter.
(Time range can be made from 1~59 sec.)
If 60 sec is selected, backlight is always on.
LCD CONTRAST
Adjust LCD contrast of the player.
27

Advertisement

Table of Contents
loading

Table of Contents