CM1942 User Manual
Alternate HSM Invocation Keys
An alternate set of HSM invocation keys is provided in case the default set
conflicts with programs running on the computers.
To switch to the alternate HSM invocation set, do the following:
1. Invoke HSM (see page 21).
2. Press and release [H].
The HSM invocation keys become the [Ctrl] key (instead of [Num Lock])
and the [F12] key (instead of [-]).
Note: This procedure is a toggle between the two methods. To revert back
to the original HSM invocation keys, invoke HSM, then press and
release the [H] key again.
Alternate Port Switching Keys
An alternate way of activating port switching is by pressing the [Ctrl] key
twice. To use the alternate port switching hotkeys, do the following:
1. Invoke HSM (see page 21).
2. Press and release [T].
Note: This procedure is a toggle between the two methods. To revert back
to the original [Scroll Lock] [Scroll Lock] method, go through the
steps above.
22