ATEN CM1942 User Manual page 51

2-port 4k displayport dual display mini-matrix boundelss kvm switch

Hide thumbs Also See for CM1942:

Table of Contents

5. After you have made your device selection(s), Click Next to perform the

upgrade.

If you enabled Check Firmware Version, the Utility compares the device's

firmware level with that of the upgrade files. If it finds that the device's

version is higher than the upgrade version, it brings up a dialog box

informing you of the situation and gives you the option to Continue or

Cancel.

If you didn't enable Check Firmware Version, the Utility installs the

upgrade files without checking whether they are a higher level, or not.

As the Upgrade proceeds, status messages appear in the Status Messages

panel, and the progress toward completion is shown on the Progress bar.

The firmware [Ver 1.0.] is not newer than the current firmware

[Ver 1.0.090] in device CM1942 [MAIN]: 000

Continue the upgrade? [Yes/No]

6. The Firmware Upgrade Utility

Table of Contents