Caller Id Display Change; Camp-On - Iwatsu ADIX VS Owner's Manual

Caller ID Display Change

The information displayed on the station LCD during incoming ringing,
call in progress, incoming forwarded call ringing, and camped-
on/transferred call ringing may be changed by pressing a CID DISPLAY
CHANGE key. This feature may be used only incoming calls on Caller
ID/ANI or DNIS lines. Ten different display modes are available. The
display mode is determined by the type of call and status of call.
Operation
During call in progress:
Press the CID DISPLAY CHANGE button

Camp-On

Allows you to alert a busy extension user that an outside call is waiting for
them to answer. The busy extension user will hear periodic tone bursts
through the speaker. If they have a display, the display will first indicate
the extension that sent the call followed by CAMP-ON. If the busy
extension does not respond within a specified period of time, the call will
return back to you.
Operation
To Initiate Camp-On:
Press the Transfer button TRAN
Wait for the dial tone
Dial the desired extension number
Hang up
To answer a Camp-On:
Hang up on the first call
Or
Press the Hold button HOLD/DND to place the first call on
Hold
Or
Press the Call Park button PARK to place the first call on Call
Park
Answer the second call
Digital Telephone User's Guide - 71