Single-Line Telephone - Basic Features
Note: The Feature Access Codes listed in the section are the default
settings. Actual operation depends on the programming in your ADIX-VS
system database.
Making an Outgoing Call
Lift the receiver
Dial the access code for an outside line (assigned by the system
installer)
Wait for the dial tone
Dial the desired phone number
If you make a dialing mistake, hang up and try again.
Receiving an Incoming Call
Operation
When your phone rings:
Lift the receiver and you will be connected to the call
Making an Intercom Call
Operation
Lift the receiver
Wait for the dial tone
Dial the desired extension number
Receiving an Intercom Call
Operation
When your phone rings:
Lift the receiver and you will be connected to the call
Single-Line Telephone User's Guide - 127