Kenwood KMM-BT304 Instruction Manual page 31

INSTALLATION/CONNECTION
Part list for installation
(A) Faceplat e (B)
(C) M ount ing sleeve (D)
Ext ract ion key
(E)
Basic procedure
Remove the key from the ignition sw itch, then disconnect the
1
[ terminal of the car battery.
Connect the w ires properly.
2
See Wiring connect ion. ( 28)
Install the unit to your car.
3
See Inst alling t he unit (in-dash m ount ing).
Connect the [ terminal of the car battery.
4
5 Press to turn on the pow er.
6 Detach the faceplate and reset the unit w ithin 5 seconds. (
Installing the unit (in-dash mounting)
Trim plat e
Wiring harness
How to remove the unit
1
2
3
3)
Hook on t he t op side
Orient at e t he t rim plat e as
illust rat ed before fit t ing.
Detach the faceplate.
Remove the trim plate.
Insert the extraction keys deeply into the
slots on each side, then follow the arrow s
as show n on the illustration.
Do t he required
w iring. ( 28)
Dashboard of
your car
Bend t he appropriat e t abs t o hold t he
m ount ing sleeve firm ly in place.
ENGLISH
27