Table of Contents
Advertisement
AUDIO SETTINGS
LOUDNESS
LEVEL1 / LEVEL2 or LV1 / LV2 : Selects your preferred low and high frequencies boost to
produce a w ell-balanced sound at a low volum e level. ; OFF : Cancels.
SUBWOOFER SET
ON : Turns on the subw oofer output. ; OFF : Cancels.
FADER
(Not applicable if 3-w ay crossover is selected.)
R15 to F15 ( 0 ): Adjusts the rear and front speaker output balance.
BALANCE
L15 to R15 ( 0 ): Adjusts the left and right speaker output balance.
VOLUM E OFFSET
– 15 to + 6 ( 0 ): Preset the initial volum e level of each source. (Before adjustm ent, select the
source you w ant to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Not applicable for RADIO source and AUX source.)
(Sound
ON : Creates realistic sound by com pensating the high-frequency com ponents and restoring
reconstruction)
the rise-tim e of the w aveform that are lost in audio data com pression. ; OFF : Cancels.
SPACE ENHANCE
(Not applicable for RADIO source.)
SM ALL / M EDIUM / LARGE or SM L / M ED / LRG : Virtually enhances the sound space. ;
OFF : Cancels.
SND REALIZER
LEVEL1 / LEVEL2 / LEVEL3 or LV1 / LV2 / LV3 : Virtually m akes the sound m ore realistic. ;
OFF : Cancels.
STAGE EQ
LOW / M IDDLE / HIGH or LOW / M ID / HI : Virtually adjust the sound position heard from the
speakers. ; OFF : Cancels.
DRIVE EQ
ON : Boosts the frequency to reduce the noise heard from outside the car or running noise
of the tyres. ; OFF : Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected (
crossover setting item s w ill be show n. (
X'OVER
selected.
DTA SETTINGS
For settings,
22, Digital Time Alignment settings .
CAR SETTINGS
•
: For 2-way crossover:
[SWITCH PREOUT]
[SUB-W]
is set to
[SUB-W LEVEL]
•
is selectable only if
20
ENGLISH
6) , 2-w ay crossover or 3-w ay
21) By default, 2-w ay crossover type is
[SUB-W LEVEL]
[SUBWOOFER SET]
/
(
5)
.
[SUBWOOFER SET]
[ON]
is set to
.
Crossover settings
Below are the available setting items for 2-way crossover
and 3-way crossover.
SPEAKER SIZE
Selects according to the connected speaker size for
optimum performance.
•
The frequency and slope settings are automatically set
for the crossover of the selected speaker.
•
When 2-way crossover is selected, if
for
[SPEAKER SIZE]
available.
• When 3-way crossover is selected, if
for
[WOOFER]
X ' OVER
• [FRQ]
[LPF FRQ]
selected speakers (high pass filter or low pass filter).
[THROUGH]
If
selected speakers.
[F - HPF SLOPE] / [R - HPF SLOPE] / [SW LPF SLOPE] / [HPF SLOPE] /
•
[LPF SLOPE] / [SLOPE]:
Selectable only if a setting other than
selected for the crossover frequency.
• [SW LPF PHASE]
output to be in line with the other speaker output.
• [GAIN LEFT]
[SW LPF GAIN]
selected speaker.
is selectable only if
[TWEETER]
[FRONT]
[REAR]
of
,
and
[X ' OVER]
, the
setting of the speaker is not
[WOOFER]
[SPEAKER SIZE]
[X'OVER]
of
, the
is not available.
[F - HPF FRQ]
[R - HPF FRQ]
[SW LPF FRQ]
/
/
/
: Adjusts the crossover frequency for the
is selected, all signals are sent to the
Adjusts the crossover slope.
[PHASE] :
/
Selects the phase of the speaker
[GAIN RIGHT]
[F - HPF GAIN]
/
/
[GAIN]
/
: Adjusts the output volume of the
[NONE]
is selected
[SUBWOOFER]
for
[NONE]
is selected
setting of
[HPF FRQ]
/
/
[THROUGH]
is
[R - HPF GAIN]
/
/
Hide quick links:
Advertisement
Table of Contents
