Kenwood KMM-BT728HD Quick Start Manual

Kenwood KMM-BT728HD Quick Start Manual

Hide thumbs Also See for KMM-BT728HD:
Table of Contents

Advertisement

Available languages

Available languages

KMM-BT728HD
KMM-X704
KMM-BT328U
DIGITAL MEDIA RECEIVER
Quick Start Guide
RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE
Guide de démarrage rapide
RECEPTOR DE MEDIOS DIGITALES
Guía de inicio rápido
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KMM-BT728HD/KMM-X704/KMM-BT328U/KMM-BT328/KMM-BT260U/KMM-BT228U/KMR-M328BT
Serial number
US Residents Only
Register your Kenwood product at http://www.kenwood.com/usa/
© 2019 JVCKENWOOD Corporation
KMM-BT328
KMM-BT260U
KMM-BT228U
Register Online
KMR-M328BT
For detailed operations and information, refer to the
INSTRUCTION MANUAL on the following website:
Pour les opérations et les informations détaillées,
reportez-vous au MODE D'EMPLOI sur le site web suivant:
Para obtener más información y detalles sobre las
operaciones, consulte el MANUAL DE INSTRUCCIONES en el
siguiente sitio web:
<www.kenwood.com/cs/ce/>
B5K-0651-10 [KN]
ENGLISH
FRANÇAIS
ESPAÑOL

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood KMM-BT728HD

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 2 à nossa saúde e ao meio ambiente. Supplier's Declaration of Conformity Trade Name: KENWOOD Products: DIGITAL MEDIA RECEIVER Model Name: KMM-BT728HD/KMM-X704/KMM-BT328U/KMM-BT328/ KMM-BT260U/KMM-BT228U/KMR-M328BT Responsible Party: JVCKENWOOD USA CORPORATION 2201 East Dominguez Street, Long Beach, CA 90810, U.S.A.
  • Page 3 SOFTWARE LICENSE AGREEMENT IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions conditions: which Users shall follow in order to use the Licensed Software.
  • Page 4 Article 4 Right pertaining to the Licensed Software Article 9 Destruction of the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or Software, any related documents and copies thereof within two (2) weeks from such date of termination.
  • Page 5: Important Notice Concerning The Software

    Important Notice concerning the Software -CMP The MIT License (MIT) Copyright (c) 2014 Charles Gunyon -jansson Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> documentation files (the "Software"), to deal in the Software without restriction, including without Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/ or sell copies of...
  • Page 6 sha2 Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Author: Chris G. Demetriou Copyright (c) 2000-2001, Aaron D. Gifford Permission to use, copy, modify and distribute this software and its documentation is hereby granted, All rights reserved.
  • Page 7 T-Kernel 2.0 Accordo2 Player This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum Apache License (www.tron.org) Licensed under the Apache License, Version 2.0, January 2004(the "License"); BSD-3-Clause You may obtain a copy of the license at Copyright (c) 2000-2001, Aaron D.
  • Page 8: Basic Procedure

    Installation/Connection Basic procedure Remove the key from the ignition switch, then disconnect the terminal of the car battery. This section is for the professional installer. Connect the wires properly. See “Wiring connection” on page 3. For safety’s sake, leave wiring and mounting to professionals. Consult the Install the unit to your car.
  • Page 9 Rear speaker (left) (B) Trimplate (×1) j Purple ª, Purple/black ·: steering wheel remote control (C) Mounting sleeve (×1) adapter or to KENWOOD Rear speaker (right) (D) Wiring harness (×1) M5 × 7 mm (×4) Marine Remote Control (E) Extraction key (×2) M5 ×...
  • Page 10: Before Use

    Before Use Basics IMPORTANT Faceplate • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Lights up when Warnings and Cautions in this Guide. Bluetooth • Please keep the Guide in a safe and accessible place for future connection is reference.
  • Page 11: Getting Started

    To adjust the clock On the faceplate Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn on the power Press B SRC. Turn the volume knob to make the settings, then press the knob. • Press and hold to turn off the power. Set the time in the order of “Hour” ...
  • Page 12: Start Playback

    Default: [XX] USB/iPod [SYSTEM] Start playback [KEY BEEP] [ON]: Activates the keypress tone. ; [OFF]: Deactivates. The source changes automatically and playback starts when you attach a [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ; device (USB device/ iPod/iPhone) to the USB input terminal.
  • Page 13: Functions Settings

    Turn the volume knob to select [AUDIO CONTROL], then press the knob. • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: <www.kenwood.com/cs/ce/> • The availability of each item vary depending on the model.
  • Page 14: Illumination Color Setting

    AMAZON ALEXA sources, refer to the INSTRUCTION MANUAL on the Press the volume knob to enter [FUNCTION]. following website: <www.kenwood.com/cs/ce/> • The availability of each source vary depending on the model. Turn the volume knob to select [DISPLAY], then press the knob.
  • Page 15: Connect The Microphone

    Pair and connect a Bluetooth device for the first time Play back/pause Press 6 IW. Press B SRC to turn on the unit. Select group or folder Press 2 Search and select the name of your receiver (“KMM-BT728HD”/ “KMM-X704”/“KMM-BT328U”/“KMM-BT328”/“KMM-BT260U”/ Reverse skip/Forward skip Press “KMM-BT228U”/“KMR-M328BT”) on the Bluetooth device. Reverse/Fast-forward Press and hold “PAIRING”...
  • Page 16: Procédure De Base

    Installation/Connexion Procédure de base Retirez la clé de contact, puis déconnectez la borne de la batterie de la voiture. Cette section est réservée aux installateurs professionnels. Connectez les fils correctement. Voir “Connexions” à la page 3. Pour des raison de sécurité, laissez le travail de câblage et de montage des Installez l’appareil dans votre voiture.
  • Page 17 (D) Faisceau de fils (×1) M5 × 7 mm (×4) de télécommande de volant (E) Clé d’extraction (×2) ou à la télécommande marine M5 × 6 mm (×4) KENWOOD (en option) pour le M4 × 8 mm (×1) Rouge: Allumage 12 V...
  • Page 18: Avant L'utilisation

    Avant l’utilisation Fonctionnement de base IMPORTANTES Façade • Pour utiliser correctement l’appareil, veuillez lire ce Guide complément avant de l’utiliser. Il est particulièrement important que vous lisiez et S’allume quand acceptiez les avertissements et les précautions de ce Guide. la connexion •...
  • Page 19: Prise En Main

    Pour ajuster l’horloge Pour Sur la façade Tournez le bouton de volume pour choisir [CLOCK ADJUST] , puis appuyez sur Mettez l’appareil sous tension Appuyez sur SRC. le bouton. • Maintenez la touche enfoncée pour Tournez le bouton de volume pour faire les réglages, puis appuyez sur le mettre l’appareil hors tension.
  • Page 20 [XX] USB/iPod Défaut: [SYSTEM] Démarrez la lecture [KEY BEEP] [ON] [OFF] : Met en service la tonalité des touches. ; : Met hors service la La source change automatiquement et la lecture démarre quand vous connectez fonction. un périphérique (périphérique USB/ iPod/iPhone) à la prise d’entrée USB. [FACTORY RESET] [YES] : Réinitialise les réglages aux valeurs par défaut (sauf la station...
  • Page 21: Réglages Des Fonctions

    Pour retourner à l’option de réglage précédente, appuyez sur • Reportez-vous au MODE D’EMPLOI sur les sites web suivant pour une explication détaillée de chaque élément: <www.kenwood.com/cs/ce/> Tournez le bouton de volume pour choisir [SUBWOOFER SET] , puis appuyez •...
  • Page 22: Réglage De La Couleur D'éclairage

    Autres informations Pour les opérations de lecture des sources AUX, Spotify, Pandora®, SiriusXM® Radio, AMAZON ALEXA , reportez-vous au MODE D’EMPLOI sur le site web suivant: <www.kenwood.com/cs/ce/> Appuyez sur le bouton de volume pour entrer [FUNCTION] • La disponibilité de chaque source varie en fonction du modèle.
  • Page 23: Répondre À Un Appel

    Bluetooth pour la première fois Appuyez sur SRC pour mettre l’appareil sous tension. Choisissez un groupe ou un Appuyez sur 2 Recherchez et sélectionnez le nom de votre récepteur (“KMM-BT728HD”/ dossier “KMM-X704”/“KMM-BT328U”/“KMM-BT328”/“KMM-BT260U”/ “KMM-BT228U”/“KMR-M328BT”) sur le périphérique Bluetooth. Saut vers l’arrière/saut vers l’avant Appuyez sur “PAIRING”...
  • Page 24: Procedimiento Básico

    Instalación/Conexión Procedimiento básico Quite la llave del interruptor de encendido; después, desconecte el terminal de la batería del automóvil. Esta sección es para los instaladores profesionales. Conecte los cables correctamente. Consulte “Conexión del cableado” en la Para fines de seguridad, deje que un profesional realice el cableado y página 3.
  • Page 25 (D) Mazo de conductores (×1) M5 × 7 mm (×4) volante de dirección o a la (E) Herramienta de extracción (×2) unidad del mando a distancia M5 × 6 mm (×4) para uso marino KENWOOD M4 × 8 mm (×1) (accesorio opcional) para...
  • Page 26: Antes Del Uso

    Antes del uso Puntos básicos IMPORTANTE Placa frontal • Antes de utilizar este producto y para asegurar su uso correcto, lea esta guía por completo. En especial, lea y observe las Advertencias y Se ilumina Precauciones incluidas en esta guía. cuando se •...
  • Page 27: Procedimientos Iniciales

    Para ajustar el reloj Para En la placa frontal Gire la rueda de volumen para seleccionar [CLOCK ADJUST] y, a continuación, Encender la unidad Pulse SRC. pulse la rueda. • Pulse y mantenga pulsado para apagar Gire la rueda de volumen para realizar los ajustes y, a continuación, pulse la la unidad.
  • Page 28 [XX] USB/iPod Predeterminado: [SYSTEM] Inicie la reproducción [KEY BEEP] [ON] [OFF] : Activa el tono de pulsación de teclas. ; : Se desactiva. La fuente cambia automáticamente y la reproducción se inicia al conectar un [FACTORY RESET] [YES] : Se restablecen los ajustes predeterminados (excepto la emisora dispositivo (dispositivo USB/ iPod/iPhone) al terminal de entrada USB.
  • Page 29 • Para obtener más detalles sobre cada una de las opciones, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web: <www.kenwood.com/cs/ce/> • La disponibilidad de cada opción varía según el modelo. Gire la rueda de volumen para seleccionar...
  • Page 30: Ajuste Del Color De Iluminación

    Pandora®, SiriusXM® Radio, AMAZON ALEXA, consulte el MANUAL DE Pulse la rueda de volumen para ingresar en [FUNCTION] INSTRUCCIONES en el siguiente sitio web: <www.kenwood.com/cs/ce/> • La disponibilidad de cada fuente varía según el modelo. Gire la rueda de volumen para seleccionar [DISPLAY] y, a continuación, pulse...
  • Page 31: Contestar Una Llamada

    Pulse 6 Bluetooth Pulse SRC para encender la unidad. Seleccione un grupo o carpeta Pulse 2 Busque y seleccione el nombre de su receptor (“KMM-BT728HD”/ “KMM-X704”/“KMM-BT328U”/“KMM-BT328”/“KMM-BT260U”/ Omisión hacia atrás/omisión Pulse “KMM-BT228U”/“KMR-M328BT”) en el dispositivo Bluetooth. hacia delante En la pantalla aparece los mensajes “PAIRING”...
  • Page 32 • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio™ and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.

Table of Contents