Kenwood KMM-BT304 Instruction Manual page 18

BLUETOOTH®
(for
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] [35] [15]
to (Default: )
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
14
ENGLISH
/ )
On t he faceplat e
Press .
Press .
Press .
Press .
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Press during a call.
• Operations may vary according to the
connected Bluetooth device.
[FUNCTION]
.
.
M IC GAIN – 10 to + 10 ( – 4 ): The sensitivity of the m icrophone increases as the
num ber increased.
NR LEVEL – 5 to + 5 ( 0 ): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL – 5 to + 5 ( 0 ): Adjust the echo cancellation delay tim e until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER 1 to 30 : The unit answ ers incom ing call autom atically in the selected
tim e (in seconds). ; OFF : Cancels.
BATT/ SIGNAL*
(For
AUTO : Show s the strength of the battery and signal w hen the unit
detects a Bluetooth device and the Bluetooth device is connected. ;
OFF : Cancels.
Functionality depends on the type of the phone used.
*
Default:
.
Default:
)
XX
XX