Hyundai Elantra N Owner's Manual page 88

Instrument Cluster
Tachometer
Normal mode
N mode
The tachometer indicates the
approximate number of engine
revolutions per minute (RPM).
Use the tachometer to select the correct
shift points and to prevent lugging and/
or over-revving the engine.
NOTICE
Do not operate the engine within the
tachometer's RED ZONE. This may
cause severe engine damage.
4-6
Engine Coolant Temperature Gauge
Normal mode
OCN7040007
N mode
OCN7N041133N
This gauge indicates the temperature
of the engine coolant when the Engine
Start/Stop button is in the ON position.
NOTICE
If the gauge pointer moves beyond
the normal range area toward the "H"
position, it indicates overheating that
may damage the engine.
Do not continue driving with an
overheated engine. If your vehicle
overheats, refer to "If the Engine
Overheats" in chapter 8.
Never remove the radiator cap when
the engine is hot. The engine coolant is
under pressure and could cause severe
burns. Wait until the engine is cool
before adding coolant to the reservoir.
WARNING
OCN7040009
OCN7N041134N