Hyundai Elantra N Owner's Manual page 477

Turn signal lamp (Outer lamp) (Bulb
type)
1. Open the trunk lid.
2. Remove the service cover by pulling
out the service cover.
3. Loosen the assembly retaining nuts.
4. Remove the rear combination light
assembly from the body of the
vehicle.
[1] : Turn signal lamp
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
OCN7080045
the socket align with the slots on the
assembly.
6. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
OCN7080046
socket clockwise.
OCN7080047
09
OCN7N091034L
9-61