Cleaning Procedure For The Plotter Screen - Interphase Chart Master Chart Master 11 CVS+ User Manual

Avoid overheating which may cause loss of contrast and, in extreme cases,
a darkening of the screen. Problems which occur from overheating are re-
versible when temperature decreases.

CLEANING PROCEDURE FOR THE PLOTTER SCREEN

Cleaning your chart plotter screen is a very important operation and must be
done carefully. Since the surface
procedure for cleaning all the surfaces can be performed in the following way. You
use a tissue or lens tissue and a cleaning spray containing Isopropanol (a normal
spray cleaner sold for the PC screen, for example PolaClear by Polaroid). Fold the
tissue or lens tissue into a triangular shape, moisten the tip and use the index
finger behind a corner to move the tissue across the surface, in overlapping side
to side strokes. If the tissue is too wet, a noticeable wet film will be left in its path
and you will need to repeat the process. If too dry, the tissue won't glide easily,
and may damage the surface.
NOTE We will not be liable for errors contained herein, or for incidental or
consequential damages in connection with the performance or use of this
material.
12
is covered by an antireflective coating, the
User Manual