Installing The Easylan 10I2 Adapter; Connecting The Easylan 10I2 Adapter To Your Network - Intermec EasyLAN 10I2 User Manual

Installing the EasyLAN 10i2 Adapter

Connecting the EasyLAN 10i2 Adapter to Your Network

EasyLAN 10i2 Ethernet Adapter User's Manual
Before you install the EasyLAN 10i2 adapter, make sure that you have the
appropriate Ethernet cable and power cable. Also make sure that you have
loaded media and ribbon into the printer. For help, see the quick start
guide for your printer.
This section explains how to physically connect the internal EasyLAN 10i2
adapter or the external EasyLAN 10i2 adapter to your network.
To connect the internal EasyLAN 10i2 adapter
1 Connect one end of a 10BaseT cable to the 10BaseT connector on the
adapter.
2 Connect the other end of the 10BaseT cable to an Ethernet port for
your network.
To connect the external EasyLAN 10i2 adapter
Note: Although you can connect the external adapter to many different
Intermec printers, the illustrations in the next procedure show the 7421.
1 Note the MAC address found on the underside of the EasyLAN 10i2
adapter. You need this address during the configuration.
2 Turn off the printer.
3 Plug the parallel port connector on the adapter into the parallel port on
the printer.
Chapter 1 — Installing the Adapter
Parallel
port
Parallel port
connector
10BaseT
connector
10BaseT
cable
EL10i009.eps
5