Printing Through Ftp; Printing From A Windows Nt 4 Pc Or Windows 2000/Xp Pc; Setting Up For A Windows Nt 4 Pc - Intermec EasyLAN 10I2 User Manual

Printing Through FTP

Printing From a Windows NT 4 PC or Windows 2000/XP PC

EasyLAN 10i2 Ethernet Adapter User's Manual
After you install the EasyLAN 10i2 adapter in your network, you are ready
to print through it. This section explains how to use FTP to print to your
printer.
To print using an FTP session
1 From an MS DOS prompt, login to the EasyLAN 10i2 adapter using
the command
ftp ipaddress
name assigned to the adapter. The default name is
where nnnnnn is the last six digits of the MAC address.
2 Press Enter. You do not need to enter a specific user id and password.
3 Enter the following command to print the test label:
put c:\path\file_name p1
where:
c: is the drive where the file you want to print is.
path is the directory that the file is in.
file_name is the name of the file you want to print.
p1 is the name of the port you want to print to.
4 Log out using the command
FTP version.
This section explains how to set up your printer to print from a Windows
NT 4 PC or Windows 2000/XP PC.

Setting Up for a Windows NT 4 PC

To print from a Windows NT 4 PC, you need to prepare the Windows
NT 4 PC for LPR/LPD printing and then install the printer.
To prepare for LPR/LPD printing
1 From the Start menu, select Settings > Control Panel. The Control
Panel dialog box opens.
2 Double-click the Network icon. The Network dialog box opens.
3 Select Protocols.
4 Add TCP/IP Protocol, select Services, and add MS TCP/IP Printing.
Chapter 1 — Installing the Adapter
, where ipaddress is the IP address or
INTERMEC_nnnnnn
, , or depending on your
quit bye exit
9