Out Of The Box; Installing The Easylan 10I2 Adapter; Connecting The Easylan 10I2 Adapter To Your Network - Intermec EasyLAN 10I2 Quick Start Manual

Out of the Box

Your printer with the EasyLAN 10i2 adapter installed
comes with the following:
™
• PrinterCompanion CD-ROM, which includes the
EasyLAN 10i2 Ethernet Adapter User's Manual (P/N
072889) in PDF format and the Intermec print
monitor
• This guide and Important EasyLAN 10i2 Information!

Installing the EasyLAN 10i2 Adapter

Before you install the EasyLAN 10i2 adapter, make sure
that you have the appropriate Ethernet cable and power
cable. Also make sure that you have loaded media and
ribbon into the printer. For help, see the quick start guide
for your printer.
Connecting the EasyLAN 10i2 Adapter to Your
Network
This section explains how to physically connect the
internal EasyLAN 10i2 adapter or the external EasyLAN
10i2 adapter to your network.
To connect the internal EasyLAN 10i2 adapter
1 Connect one end of a 10BaseT cable to the 10BaseT
connector on the adapter.
2 Connect the other end of the 10BaseT cable to an
Ethernet port for your network.
To connect the external EasyLAN 10i2 adapter
Note: Although you can connect the external
adapter to many different Intermec printers, the
illustrations in the next procedure show the 7421.
1 Note the MAC address found on the underside of the
EasyLAN 10i2 adapter. You need this address during
the configuration.
8 EasyLAN 10i2 Ethernet Adapter Quick Start Guide