Accessing Rfid Setup Via Tcp/Ip - Intermec EasyCoder PM4i User Manual

Accessing RFID Setup via TCP/IP

The printer's RFID setup parameters can also be changed via a TCP/
IP communication channel. Acquire the printer's IP address from the
console (Setup > Network > IP Address), open your web browser and
enter the number into the address field. This opens up the printer's home
page.
In the main menu, select Configuration. This brings up a list of folders
on the left-hand side of the window. Select Printer > RFID.
RFID Kit (Gen 2, 869/915 MHz) User's Guide 11