Cover/Seat Open/Close Function - Kohler Innate K-8340TW-2EXSG-0 Homeowner's Manual

Cover/seat OPEN/CLOSE function

A. Cover OPEN/CLOSE
Auto cover OPEN, CLOSE
When cover is CLOSE, user enters sensor area, cover auto open.
When cover is OPEN, user leave sensor area, cover auto close after a period of time.
Cover OPEN and CLOSE by remote
When unseated, press seat OPEN/CLOSE button on remote, perform corresponding OPEN/CLOSE function
(details are shown in the diagram of remote control). When seated, press remote
Manual cover OPEN and CLOSE
User could manually OPEN/CLOSE cover. When users intend to open
or close the cover under normal condition, the cover can open or close
automatically against the trend of motion. Users will not have to use force.
Once being stopped by any obstacle during motion, the cover will
automatically stop moving.
Attention:
When customer enters sensing zone slowly, cover OPEN/CLOSE sensing
1.
distance might be shortened. If there's no response, OPEN/CLOSE cover
by remote or by manual mode.
2. Auto cover OPEN/CLOSE function will be valid when remote "cover
OPEN/CLOSE" function set to "ON" (setting method refer to page 10).
3. Do not place any moving obstacle 70cm in front of toilet tip, if there is
one, cover might auto open. Refer to page 10 to exit auto cover OPEN/
CLOSE function.
4. When open cover, auto spray water mist so the dirt is not easy to stick
on the toilet.
B. Seat OPEN/CLOSE
Seat OPEN and CLOSE by remote
When unseated, press seat OPEN/CLOSE button on remote, perform corresponding OPEN/CLOSE function
(details are shown in the diagram of remote control). When being seated, press remote
1408701-TW01-B 12
button will be invalid.
button will be invalid.
Kohler Co.