Intermec EasyCoder 3400e User Manual page 11

9. Lift the cutter cover up. When you close the cutter cover, you should hear a
soft click. If you do not hear a click, swing the cutter cover down and gently
pull the disable switch away from the cutter. The disable switch must touch
the safety tab on the cutter cover for the cutter to operate.
Disable
switch
Safety tab
10. With the cutter cover upright, tighten the screw on top of the cutter.
11. Pull out on the top of the cutter and swing the cutter down.
Cleaning the Cutter
4XXU.008
11