Intermec EasyCoder 3240 Developer's Manual page 74

Chapter 4 — Advanced Printer Programming
60
• Print resolution is in 10 mil dots.
• RFID commands are not available.
Two IPL commands place the printer in Emulation mode:
• Emulation or Advanced Mode on Power-Up
• Emulation Mode, Enter
The following table lists all the IPL commands that work when the printer
is in Emulation mode.
IPL Commands and Emulation Mode
IPL Command Name
12 Volt Supply Value, Transmit
Abort Print Job
Advanced Mode, Select
Alphanumeric Field Separator
Auto-Transmit 1, Enable
Auto-Transmit 2, Enable
Auto-Transmit 3, Enable
Auto-Transmit 1, 2, and 3, Disable
Bar Code, Select Type
Bar Code Field, Create or Edit
Batch Count, Set
Bitmap Cell Height for Graphic or UDF, Define
Bitmap Cell Width for Graphic or UDF, Define
Bitmap User-Defined Font, Clear or Define
Border Around Human-Readable Text, Define
Box Field, Create or Edit
Character Bitmap Origin Offset, Define
Character Rotation or Bar Code Ratio, Define
Clear All Data
Clear Data From Current Field
Code 39 Prefix Character, Define
Command Tables, Load
Command Terminator
Command Terminator 1
Command Terminator 2
Communication Port Configuration, Set
Configuration Parameters, Transmit
Control Panel Access Permission, Set
Current Edit Session, Save
Cut
Syntax
U
<EM>
<ESC>C
<GS>
<ESC>j
<ESC>d
<ESC>e
<ESC>k
c
B
<US>
y
x
T
b
W
X
r
<CAN>
<DEL>
p
C
;
<NUL>
<LF>
<SI>P
<ESC>p
<SI>A
N
<SO>
Intermec Printer Language (IPL) Developer's Guide