Intermec EasyCoder 3240 Developer's Manual page 70

Chapter 3 — Working with Fonts and Graphics
56
The user-defined font can now be used in a bar code label. You can specify
the user-defined font for a human-readable or interpretive field. Characters
in data you specify for those fields are mapped to the user-defined font.
The next table lists the complete command string set for the user-defined
font in this example.
Command Strings for User-Defined Font Example
Commands
<STX><ESC>C<ETX>
<ESC>P;<ETX>
<STX>T3,FONT3<ETX>
<STX>x10;y14;<ETX>
<STX>t36;Z12;<ETX>
<STX>u0,|q@;<ETX>
<STX>u1,~sA;<ETX>
<STX>u2,FcA;<ETX>
<STX>u3,FcA;<ETX>
<STX>u4,<DEL><DEL>C;<ETX>
<STX>u5,<DEL><DEL>C;<ETX>
<STX>u6,FcA;<ETX>
<STX>u7,FcA;<ETX>
<STX>u8,N<DEL>A;<ETX>
<STX>u9,L~@;<ETX>
<STX>R;<ETX>
Definitions
Selects Advanced mode
Enters Program mode
Create bitmap font 3
Define cell width (10) and cell height
(14)
Create ASCII character 36 ($), define
character width as 12
Defines column 0
Defines column 1
Defines column 2
Defines column 3
Defines column 4
Defines column 5
Defines column 6
Defines column 7
Defines column 8
Defines column 9
Saves and exits to Print mode
Intermec Printer Language (IPL) Developer's Guide